Accurate fuel & runtime control
Measure actual fuel consumption and engine operating time — and cut fuel costs by 16–23%*.
Multi-brand remote monitoring & fuel control for diesel generators
One cloud platform for fuel, engine, alternator, location and maintenance data — across stationary and mobile gensets, different engines and controller brands.
300+live parameters per genset
10,000+ parameter database
10,000+ parameter database
600,000+assets equipped worldwide
Technoton sensors & gateways
Technoton sensors & gateways
22%average fuel savings
selected published cases
selected published cases
Retrofit + OEMexisting & new gensets
integration-ready hardware
integration-ready hardware
Remote monitoring and control of diesel generators
Monitor remotely.
Keep every genset ready.
Fuel theft prevention
Detect unauthorized losses from tanks and fuel lines.
Objective management data
Use 300+ standardized genset parameters for operating and financial decisions.
Reliable operation
Support uninterrupted and fault-free genset operation.
Remote diagnostics
Monitor critical parameters and alarms 24/7 to detect faults earlier and plan maintenance.
Lower maintenance cost
Plan service from actual condition & operating hours — cut maintenance costs by 50%*.
* Based on published genset monitoring cases.
Multi-brand diesel generator monitoring for mixed fleets
Cover more of the monitoring stack without trade-offs.
UNUM Genset combines multi-brand coverage, instrument-based fuel measurement, edge Events, flexible subscriptions and a supported hardware architecture in one system.
| What matters | UNUM Genset | OEM systems | Controller systems | Universal aftermarket | SCADA |
|---|---|---|---|---|---|
| One interface for mixed-brand fleets | ✓ | — | — | ✓ | ✓ |
| Dedicated fuel-level + fuel-line measurement | ✓ | — | — | ✓ | — |
| Real-time monitoring, alarms & remote control | ✓ | ✓ | ✓ | ✓ | ✓ |
| Dashboards, reports & web/mobile access | ✓ | ✓ | ✓ | ✓ | — |
| 300+ standardized genset parameters | ✓ | — | — | — | — |
| Onboard Event detection before upload | ✓ | ✓ | ✓ | — | ✓ |
| Documented device-to-platform integration | ✓ | ✓ | ✓ | ✓ | ✓ |
| Task-based daily billing per genset | ✓ | — | — | — | — |
| Retrofit path for installed gensets | ✓ | ✓ | ✓ | ✓ | ✓ |
| Factory-installed monitoring with a new genset | — | ✓ | ✓ | — | — |
✓ = documented or commonly available capability in the category; — = not a typical standard capability. Depth, brand coverage and implementation effort differ between systems.
Cloud-based diesel generator monitoring and analytics
From onboard data to decisions that reduce risk and operating cost.
UNUM Genset connects smart sensors, controller data and telematics equipment to dashboards, reports and alerts in one cloud service.
Onboard data
Smart sensors, the genset controller and telematics equipment collect operating data directly on site.
UNUM cloud
The cloud service turns live parameters and events into dashboards, reports and alerts in the web interface and mobile app.
Operating teams
Managers, finance teams, service specialists and dispatchers work from one shared source of current and historical data.
Diesel generator remote monitoring case studies
Monitoring systems proven on real gensets.
Selected projects show measurable gains from direct fuel measurement, remote diagnostics and cloud monitoring.
−16% fuel costs
Four Cummins gensets in one fuel-monitoring system
Measured consumption and tank data replaced manual checks and norm-hour accounting.
View project
−23% fuel costs
Fuel monitoring for CAT backup generators
Fuel use, tank events and controller data became available remotely.
View project
3× lower travel costs
Remote management of generators far from the office
Remote data cut specialist travel costs 3× and maintenance costs by 50%.
View projectMulti-brand genset fleet monitoring platform
Mixed fleet monitoring.
One software.
Use one operating environment across existing and new gensets while keeping the engines and controllers already in the field.
Different gensets and engine brands
Any genset. One monitoring system.
Monitor stationary and mobile gensets across CAT, Cummins, Deutz, Volvo, Yanmar and other engine brands.
Different genset controllers
Any controller. One data model.
Connect ComAp, DSE, Datakom, KOHLER SDMO, SmartGen and other supported controllers through compatible interfaces.
Task-based diesel generator monitoring services
Activate only what each genset needs — and pay only while it is active.
Tasks are billable telematics service functions for Operational Monitoring and Post-Analysis, with ready-to-use dashboards, reports and parameter sets.
Fuel Monitoring
Track tank level, refuelling, draining and actual fuel consumption in real time, then analyze operation by work mode.
- Current fuel rate, total fuel used and remaining fuel
- Automatic refuelling and draining events
- Detailed reports and work-mode charts
Fuel levelFuel rateCO₂
Live fuel data and analytical reports
Genset telematics and fuel monitoring hardware
One compatible hardware stack — faster deployment, simpler support.
A compatible hardware stack from one supplier, built around common cabling principles, simplifies component selection, wiring and support. DFM and DUT-E fuel measurement works alongside engine CAN and controller data in the same telematics architecture.
CAN J1939 / S6Engine data
CAN J1939 / S6Read engine operating parameters from the ECU over CAN J1939; S6 is used within the Technoton data interface.
RS-485 ModbusData exchange with compatible genset controllers
RS-485 ModbusExchange operating parameters and supported commands with compatible genset controllers over Modbus RTU.
CANUp
Telematics gateway
CANUpCollects and processes sensor, CAN J1939 and Modbus data, detects Events at the edge and sends reports to UNUM cloud.
DFM
Direct fuel consumption measurement
DFMMeasures actual fuel consumption directly in the engine fuel line and records operating time, fuel temperature and tampering-related data.
DUT-E
Fuel level, refills & drains
DUT-EMeasures fuel level and volume in tanks and makes refuelling, draining and remaining-fuel changes visible in the monitoring system.
CANCrocodile
Contactless CAN data reading
CANCrocodileReads engine CAN J1939 data without cutting insulation or making an electrical connection to the vehicle CAN wires.
MasterCAN
CAN / S6 data conversion
MasterCANConverts data between CAN J1939/S6, RS-232/RS-485 and Modbus RTU to integrate controllers, sensors and external devices.
UNUM Genset presentation
Get the architecture, monitoring tasks and use cases in one PDF.
Enter your name, company and corporate email to download the current UNUM Genset solution presentation.
See how onboard hardware and UNUM cloud work together.
Official UNUM Genset overview: remote monitoring, smart sensors, gateways and post-analysis in one workflow.
Contact UNUM Genset
Let’s discuss your genset monitoring project.
Tell us about your gensets, controllers and monitoring goals. Our team will contact you and recommend a suitable configuration.
Emailinfo@unum-genset.com
Phone+420 910 122 429
WhatsApp+420 606 934 342
Office
Wagencontrol s.r.o.
Holečkova 777/39
150 00 Prague, Czech Republic
FAQ
Frequently asked questions
CompatibilityCan UNUM Genset work with different controller brands?
Yes. UNUM Genset is designed for multi-brand fleets. Supported controller data and control functions can be brought into one cloud monitoring environment, so operators do not need a separate monitoring workflow for every genset brand.
DataWhat operating data can be monitored?
The platform can combine electrical, engine, controller, fuel, status, alarm and location data. The exact parameter set depends on the connected controller, ECU, sensors and telematics hardware.
FuelWhat fuel data can be monitored?
With compatible fuel level sensors and flow meters, operators can see tank level, direct fuel consumption, engine operating time, refuelling and draining events, history and sudden fuel-level changes that may indicate leaks or theft.
AlertsHow are alarms and notifications handled?
Custom event triggers can be created for monitored parameters. Controller and edge-device events can be surfaced in the platform and notifications can be delivered through supported channels such as the mobile application and e-mail.
DiagnosticsDoes UNUM Genset support remote diagnostics?
Yes. The system can collect diagnostic trouble codes from the genset controller and engine ECU and show decoded descriptions, helping service teams understand a fault before travelling to the site.
LocationCan I track genset location and use geofences?
With the GPS option, operators can view current and historical location data, track mobile or rented assets and use geofences for additional monitoring and event handling in predefined areas.
ReportsCan reports cover individual gensets and groups?
Yes. Reports can be prepared for a single asset or a group of assets, scheduled automatically and combined with long-term statistics, charts and Analyzer views for deeper investigation.
ConnectivityWhat interfaces and connectivity can be used?
UNUM telematics hardware can work with genset and sensor data over CAN J1939/S6 and Modbus RTU, support Bluetooth Low Energy (BLE/S7) for wireless sensors and 2 analog inputs for standard analog signals, and transmit data over cellular or Wi-Fi connections.
ControlCan gensets be controlled remotely?
Supported remote-control functions depend on the connected controller and integration. Where the controller and interface support them, monitoring and control can be combined in the same UNUM Genset environment.
IntegrationCan dashboards, reports and branding be customized?
Yes. UNUM Genset supports customized dashboards and reports, and the platform can be adapted with company branding and data integration according to project requirements.
Still planning the architecture?Tell us which gensets, controllers and fuel-measurement tasks you need to connect.
Discuss configuration